Gen 3 Insight Forum banner
1 - 1 of 1 Posts

· Registered
152 Posts
Discussion Starter · #1 ·
Channel-lock pliers
10mm socket and extension

1. Remove 10mm bolt tucked between drivers side seat bottom and back.

2. Pull up on front corner of seat bottom and locate white plastic latch.

3. Gently grab either side of the latch and pull towards front of car. Seat bottom should pop up. Repeat on other side.


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.