Gen 3 Insight Forum banner

1 - 1 of 1 Posts

19 Posts
Discussion Starter #1
So I put this in right after I purchased the car in July and just now getting around to posting it.

I used a Blend Mount kit to attach the radar detector to the rearview mirror stem and hardwired to an unused fuse in the fuse box using a Tap A Fuse. I found the fuse by researching the Civic’s fuse panel as they’re the same for the most part.

I also had to mount the mute button in the most logical place of which you’ll see is right by my right knee. I had to remove some panels and dremel a spot for the mute wire to route through. Not a lot of work, but would definitely would recommend professional installation if you’re not comfortable messing with your new car’s wiring wiring or a slight massaging of the interior panels to make this look as OEM as possible.


1 - 1 of 1 Posts